Aeropassion's homepage
Aeropassion's parteners :
Posted by Theodor Dahl 
Theodor Dahl
Problems with Jedicut sad smiley
March 03, 2007 07:03PM
Hallo

I have bought an CNC Foamcutter.
With this Controler
http://shop.strato.de/epages/Store4.sf/?ObjectPath=/Shops/61125483/Products/SM44PCV5

It is running with PCNC but not with jedicut sad smiley

Wath is wrong ?

Sorry for my bad english, I´m from germany

PS.: that is my Formcutter http://theodord.th.funpic.de/CNCfoamcutter
Theodor
Re: Problems with Jedicut sad smiley
March 03, 2007 07:08PM
bild, not bought
eptam
Re: Problems with Jedicut sad smiley
March 04, 2007 04:18PM
You must be pin configrations.
Theodor
Re: Problems with Jedicut sad smiley
March 04, 2007 04:28PM
I have di that, but it isent running
Re: Problems with Jedicut sad smiley
March 05, 2007 01:41PM
Hi !

Take a look at your Jedicut pin's configuration, timer/motor synchronization check box, and speed value. You also have to try dll (use XP dll for the beginning).

Jerome
Theodor Dahl
No Problems with Jedicut smiling smiley
March 05, 2007 05:32PM
Much thanks thumbs up

with the xp.dll it is running >grinning smiley<

I'm so lucky smiling smiley



Theodor Dahl
Sorry, only registered users may post in this forum.

Click here to login



Aeropassion

Paris en photo | Design by Le Flaketou, création de site internet

Phorum