Aeropassion's homepage
Aeropassion's parteners :
Posted by robert_m_1938 
Simplified "Jedicut"
February 18, 2008 06:15PM
Hi, Jerome!
Would it be possible, and would You create one simplified "Jedicut" for a cutter(s) with only two step-motors. I am just building such one for cutting letters and other "free" forms. The whole "Jedicut" or GMFC are to complicated for such simply cuttings. The simplified software should be possible to accept DXF- files, and nothing more. The letters (and other free forms) would be created in CorelDRAW or similar.
Regards Robert
P.S. I would send You some pictures of the new cutter, but how?
I hope, You understand my bad English spelling.
Re: Simplified "Jedicut"
February 18, 2008 08:12PM
Hi,

In order to do what you describe, you can create a wing cut, check the checkbox "symetrical cut", and set up Jedicut with the same settings on X1 and X2 motors, and, Y1 and Y2 motors. After that, you can do what you want don't you ?

Otherwise, the simplified software that you describe seems to be a cnc router...

You can send me photos using this webmail : nnx[at]aeropassion.net (replace "[at]" by "@")

cool smiley

Jerome
Re: Simplified "Jedicut"
February 19, 2008 07:06PM
Hi, Jerome!
Thanks for Your quick reply. I know all this You describe, but for simply cuttings it would be better to have a simply software. All that possibilities in Jedicut and other similar software's, confuse some users. The titles are specific for wing cutting etc.
I would like to know, what is the opinion of other members about my suggestion.
Regards Robert
P.S. I will send You some photos tomorrow.
Re: Simplified "Jedicut"
February 23, 2008 09:40AM
Hi, Jerome!
I have two questions:
1. Have You received my photos?
2. Would You create the "Simplified Jedicut"? It must not be for free.
Regards Robert
Re: Simplified "Jedicut"
February 27, 2008 01:29PM
Hi,

Yes ! Thanks for your photos !!!
Actually, I can't program a new software. I have many difficulties to find time to work on Jedicut... confused smiley Do you talk about this need with others foam cutters ?

Jerome
Re: Simplified "Jedicut"
February 29, 2008 04:28PM
Hi!
More than 50% foam cutters I have build for now ( 14 cutters), are for costumers which are not (aero) modellers. All of them have asked me for a simple software, but I could not offer nothing like this.
Robert
Sorry, only registered users may post in this forum.

Click here to login



Aeropassion

Paris en photo | Design by Le Flaketou, création de site internet

Phorum