Aeropassion's homepage
Aeropassion's parteners :
Posted by Mike nelson 
Mike nelson
Xavier USB adapter info plans
November 25, 2008 10:54PM
Hello Members ; Does anyone Know how I can obtain plans or instruuctions on building the Xavier USB adapter. Thank you!!!!!!!!!! Mike
Re: Xavier USB adapter info plans
November 25, 2008 11:14PM
You can find all plan on this website http://www.xavtronic.ch winking smiley

Enjoy winking smiley

Jerome
Re: Xavier USB adapter info plans
November 14, 2009 11:38AM
Hi Jerome!

Not work new JediCUT (V2.2.1) with Xavier USB adapter! Old version (V2.2.0) work, bat very slow.
I tested two Firmware (MM and SA).
Please revise modification!

Thanks!

www.hobbycnc.hu
Roland
Re: Xavier USB adapter info plans
November 17, 2009 09:29AM
Hello,

I confirm that this interface do not work correctly
Re: Xavier USB adapter info plans
December 11, 2009 08:26PM
Hi Jerome,

I have build the USB adapter (with sincro) and did some some tests with the MM2001 (actually satisfactory with older version of Jedicut, but nothing cut yet - machine building to follow). Please confirm if the MM-USB firmware available on Xavier site is up-dated for 2.2.1 version of Jedicut or I should use the old firmare?

Thanks in advance!
Re: Xavier USB adapter info plans
December 12, 2009 09:36AM
Hello,

I don't find why Jedicut 2.2.1 don't work with Xavier's USB adapter.

Where do you find 2 firmware ? Is there one firmware with clock integrated in adapter, and another using MM2001 internal timer ?

Jerome
Re: Xavier USB adapter info plans
December 13, 2009 11:09PM
Yes, one adapter firmware was developed by Xavier especially for MM2001 with external timer from MM2001 (xtc_adapt_MM_V2a.hex) and the other one (xtc_adapt_SA_V1.2.hex) is provided for any Mot. PAP interface i.e. without external timer signal (but I cannot confirm there is one inside the adapter generated by the firmware).

At least in my tests Jedicut v2.1.9 worked OK with the first one at 2kHz and 4kHz timer frequency and not relevant at 10kHz timer frequency; but as I said there were "cold" tests. The PIC 16F874 of MM2001 was burned with MM2001_V51.hex and PIC18F4550 of USB-CNC adapter was written with xtc_adapt_MM_V2a.hex.

Regards,
Robin
Re: Xavier USB adapter info plans
January 01, 2010 01:29PM
In the future too this interface do not work correctly! I tested V2.2.1 build 3.sad smiley
Only one axis movement, rest not moved. Please check main code!

www.hobbycnc.hu
Re: Xavier USB adapter info plans
January 02, 2010 03:20PM
Hello,

I'm working on it but whitout CNC board it's difficult...

I attached one file. Can you test it ? I desactivate heating control because it seems to be responsible of problems.

Jerome
Attachments:
open | download - XavierHID.zip (220.7 KB)
Re: Xavier USB adapter info plans
January 03, 2010 03:25PM
HCNC,

Do you use a USB Hub to connect your board ? Somebody seems to have problem in this configuration...

Jerome
Re: Xavier USB adapter info plans
January 04, 2010 12:36PM
No, directly connect PC USB - Xavier boar!
Old version (JediCut) good works with Xavier board (bat very slow motion available only)! Only new version not work!
I see Xavier dll (in old and new version), bat they are alike...

www.hobbycnc.hu
Re: Xavier USB adapter info plans
January 31, 2010 11:08AM
Hello Jerome!

New version (V2.2.2) work with Xavier USB board and speed is more, Thank You!smileys with beer
I found a problem: if not use Smooth option in manual move, then not change direction in value of +-Move(mm)! Only one direction rotation of step motor. If use Smooth option, all ok (bat under such less speed)!

www.hobbycnc.hu
Re: Xavier USB adapter info plans
January 31, 2010 05:44PM
Hello,

I'm sorry but I don't know where to search, and without CNc board it's difficult...

Do you receive my last email ?

Jerome
Re: Xavier USB adapter info plans
February 01, 2010 08:02AM
Jerome Wrote:
-------------------------------------------------------
> Hello,
>
> I'm sorry but I don't know where to search, and
> without CNc board it's difficult...
>
> Do you receive my last email ?

Hello Jerome!

No, please send again!

www.hobbycnc.hu
Re: Xavier USB adapter info plans
February 01, 2010 07:30PM
It's done winking smiley

Jerome
GUSTAVO CARDENAS
Re: Xavier USB adapter info plans
September 15, 2010 08:25PM
I have a problem with version 2.2.2. Basically the engine is x2, which works incorrectly .. I've done several tests and it is not ...
juergen Laubenheimer
Re: Xavier USB adapter info plans
October 06, 2010 10:01PM
hallo Jerome,

I construted the Xaver USB board and tried to programm the hex-Files. I connected the Board via USB to the PC. But the PC will not recognice the board.

Can you help me?

Sorry for my Englisch. I speak normally German

Juergen
Re: Xavier USB adapter info plans
March 02, 2012 08:36AM
Hi there. http://www.xavtronic.ch site does not work. Where can I download firmware.
Re: Xavier USB adapter info plans
March 02, 2012 02:23PM
Hello,

i have the file's, but to big for the attach.
i will send it to Jerome.
Scott Schering
Re: Xavier USB adapter info plans
March 02, 2012 05:14PM
I would also like a copy..
Re: Xavier USB adapter info plans
March 02, 2012 06:03PM
if you send it to vanesa3010@gmail.com

Thanks in advance
Re: Xavier USB adapter info plans
March 03, 2012 10:35AM
I sent an email to Xavier to have his permission to add his files on the forum.

Jerome
Re: Xavier USB adapter info plans
March 03, 2012 12:44PM
Quote
nesa67
if you send it to vanesa3010@gmail.com

Thanks in advance

Hello,
Xavier have the USB-Adapter projekt make to open source.
I think, Xavier has no probleme, when i send you the file's.
It's done.

Manfred
Re: Xavier USB adapter info plans
March 03, 2012 01:24PM
Quote
nesa67
if you send it to vanesa3010@gmail.com

Thanks in advance

Is the adress ok?

i become an error when i will sent you a mail.
Re: Xavier USB adapter info plans
March 03, 2012 02:46PM
Yes.
vanesa3010@gmail.com
or
nesaster@gmail.com
Re: Xavier USB adapter info plans
March 03, 2012 06:23PM
Quote
nesa67
Yes.
vanesa3010@gmail.com
or
nesaster@gmail.com

any adress error.

Here the errormassage:

This message was created automatically by mail delivery software.

A message that you sent could not be delivered to one or more of
its recipients. The following addresses failed:

<nesaster@gmail.com>

SMTP error from remote server after transfer of mail text:
host gmail-smtp-in.l.google.com[74.125.79.27]:
552-5.7.0 Our system detected an illegal attachment on your message. Please
552-5.7.0 visit http://support.google.com/mail/bin/answer.py?answer=6590 to
552 5.7.0 review our attachment guidelines. t9si6143741eef.91


--- The header of the original message is following. ---

Received: from mrmseu2.kundenserver.de (mrmseu2.kundenserver.de [172.19.20.162])
by mrelayeu.kundenserver.de (node=mreu0) with ESMTP (Nemesis)
id 0Lbf3v-1Snyra0VPX-00lGfP; Sat, 03 Mar 2012 18:19:37 +0100
Date: Sat, 3 Mar 2012 18:19:37 +0100 (CET)
From: manfred-arendt@online.de
Message-ID: <1458390503.344533.1330795176494.JavaMail.tomcat55@mrmseu2.kundenserver.de>
MIME-Version: 1.0
Content-Type: multipart/mixed;
boundary="----=_Part_329206_1038484572.1330777235472"
X-Priority: 3
To: nesaster@gmail.com
Subject: USB-Adapter
X-Originating-IP: 88.78.166.142
X-Originating-IP: 88.78.166.142
X-Provags-ID: V02:K0:7xZe7Da2qcjrX5Ko5pXHNhpqvaQwhhXGl+l1ugJR/eJ
84SaSlQF249o+2hyQK5+EOFPdWXd7CAJI2UnoYnbfo4ViZ3c0Y
QitnHeshTUa941yYQc/k0+1nFfuqXIGt7SCAxJO5jqzn++O/xP
ITVtEOGWBwGSG+jr5J5S1A9tn2OEbTx9+Wlp7y72LzPWdHVQwH
fg6M9FyDBoRzglZJmLj4XfWTFZfkafnoeeuH/d3sxawnN7SIQE
AgVd8Pb7zGLmpkLn7kBPku4v0+1SEm5GQ6IvWkXCFJhSvA8743
WXYOEefL039V7Wgt65aqHKMqcXwU7aSViC0fvtoNyYbrHk4JXD
FQLaXUMvJHbPnSgmBNFb/tv/rxhJDJIDHSQBGRJuMFXlFaJDUr
qgEdzD6tMu3EW1zqYFjMkPZNhx0qlGhNa3EwlCm+QcYUIA2yR3
BhElGtIUQNfQIkSgYUdOxgOhQtQ==
Re: Xavier USB adapter info plans
March 03, 2012 08:41PM
Google block emails with exe files, even if they are compressed winking smiley

Jerome
Re: Xavier USB adapter info plans
March 03, 2012 08:49PM
I do not understand why this error.I created a ftp server on my computer.
host: 46.100.200.2
username: nesa
password: nesa
Re: Xavier USB adapter info plans
March 03, 2012 08:52PM
or send to skype:

kostadin_aleksiev
Re: Xavier USB adapter info plans
March 04, 2012 03:39AM
Quote
nesa67
or send to skype:

kostadin_aleksiev

i'am not on skype.

Manfred
Sorry, only registered users may post in this forum.

Click here to login



Aeropassion

Paris en photo | Design by Le Flaketou, création de site internet

Phorum