Aeropassion's homepage
Aeropassion's parteners :
Posted by Jerome 
Bug Jedicut solved : Slow movement
December 31, 2009 12:29PM
Hello,

Thanks to Frank, I found an error in CncNet and VisualCNC dll files, if you use it with CNC board without external timer.

I will release new dll in few days.

If you try MaxCom dll and if your steppers rrun in only one direction, a solution would be to try the new CncNet or VisualCNC file.

Jerome
Re: Bug Jedicut solved : Slow movement
January 16, 2010 07:29PM
My CNC can goes faster then 0,5mm/s?!hot smiley
Please, send me new dll's with inverted ENABLE!
Re: Bug Jedicut solved : Slow movement
January 17, 2010 12:00PM
Hello,

Maybe but what dll do you use ? I don't remember...

Jerome
Re: Bug Jedicut solved : Slow movement
January 22, 2010 09:06PM
I use CNCNet98.dll.
zcz@epf.pl
Re: Bug Jedicut solved : Slow movement
January 23, 2010 07:15PM
Jedicut 2.2.2 with oblique and reference position is a big step forward - congratulations, Jerome!
But I must use 2.2.0 build 1 too, because with it i can import DXF Autocad files version 11/12 ASCII.
In upper Jedicut versions it is impossible: Import DXF -> no effect.
When DXF file is improper then I can see: "Impossible d'ouvrir ce fichier." in both versions.
Re: Bug Jedicut solved : Slow movement
January 23, 2010 08:02PM
Hello,

You will fin a new dll in your mailbox winking smiley

DXF importation is a beta functionality that don't work with all DXF files.

When you click on "Import DXF", do you see a windo when you can select a file ?

Jerome
Re: Bug Jedicut solved : Slow movement
January 23, 2010 11:54PM
Yes, I can.
Nothing happens after selection.

ZbigPL
Sorry, only registered users may post in this forum.

Click here to login



Aeropassion

Paris en photo | Design by Le Flaketou, création de site internet

Phorum