Aeropassion's homepage
Aeropassion's parteners :
Posted by Walo 
Walo
How make jedicut work
May 02, 2006 12:50PM
Hi Jerome

I tried all dll to make my motors making work. I am using the controller from odin. Even with the Oszilloskop i could not see any signal comming out of the lpt port. Do i have to feed a signal to any pin first? If i try with K-Cam 4 then i manage to run my motors!

Do you have any advice?
Re: How make jedicut work
May 02, 2006 09:45PM
Hi !

I don't know your odin board. I have some questions :

- What's your OS and what dll do you use ?
- Does your board contain a timer to synchronize orders sent to the board ? What frequency is it ?

Jerome

Jerome
Walo
Re: How make jedicut work
May 02, 2006 11:46PM
Hi jerome

I use win 2000. That board has no timer or clock devise onboard. The board is documented on http://www.deutsche-werke.de/odin3d.htm. We already talked about that and you told me then, that you want to implement also other interfaces in your programm.

Thanks for your fast answer!

Greetings

Walo
walo
Re: How make jedicut work
May 03, 2006 12:15AM
Hello Jerome

I managed it to make jedicut work! I had a bios problem....

Sorry to use your time for such things....

Regards

Walo
Sorry, only registered users may post in this forum.

Click here to login



Aeropassion

Paris en photo | Design by Le Flaketou, création de site internet

Phorum