Aeropassion's homepage
Aeropassion's parteners :
Posted by TKC 
Hello
I have bought "new" version of the controller based on 4xTB6560AHQ .The board version is 6B6560-4v3 - the "red one":


I have checked the pin configuration for the controller described in the thread Jeducut with TB6560 4axis cnc board - if possible and analyzed the output signals with the parallel port monitor - "parmon" software (http://www.geekhideout.com/parmon.shtml) and it seems that this driver could be suitable for my board except the enable signal for all axis, which on my board is on pin 1 of the parallel port and the provided driver controls pin 17. Setting change in the Engine On/Off (Jedicut menu: Tools/Options/Communication/Parallel Port) has no influence on the assignment of Enable signal on parallel port pins.

The pin configuration for board which I own is as follow :

1 Enable- LO active -all axis
2 Step X
3 Dir X
4 Step Y
5 Dir Y
6 Step Z
7 Dir Z
8 Step A
9 Dir A

10 limit switch X
11 limit switch Y
12 limit switch Z
13 limit switch A

14 Relay (for turn on/off eg. spindle or hot wire supply)

15 free

16 Step B - only signal/ no power unit on board - external controller fo B axe needed
17 Dir B - only signal/ no power unit on board- external controller for B axe needed

I know that I can change the electrical connections on board, but I wouldn't like to do it becouse I use this board already with other software as well.

Jerome would you mind to provide the driver version for this controller board? - I think it would be very useful for other users who like me bought this board.

Cheers
Tomasz
Re: Jedicut with the 4xTB6560AHQ board 6B6560-4v3 - *.dll question
November 03, 2012 10:04AM
Hello,

I take a look at Jedicut's communication plugins and they don't use Jedicut pin settings for enable signals. What Windows version do you use ?

I ask you because in a first time I don't want to modify all plugin, but just the one you need. And working on a new plugin specifically for this cnc board is a lot of work and I don't have it to do test.

Another important thing : register your profile on this forum and indicate your location just for fun winking smiley

Jerome
TKC
Re: Jedicut with the 4xTB6560AHQ board 6B6560-4v3 - *.dll question
November 03, 2012 12:38PM
Hello
Answering your questions:
- I'm using Windows XP Pro
- I think the CncNet_XP_TB6560.dll plugin afer the enable signal modification should wrok.
- I have registered my profile and indicated my location as you asked smiling smiley
Cheers
Tomasz
Re: Jedicut with the 4xTB6560AHQ board 6B6560-4v3 - *.dll question
November 04, 2012 10:51AM
Hello,

Can you try the plugin of communication in attached ?

This plugin looks like CncNet_XP.dll but in Jedicut you can now choose your pin number for signal enable signal.

Jerome



Edited 2 time(s). Last edit at 11/04/2012 10:54AM by Jerome.
Attachments:
open | download - CncNet_XP_TB6560.zip (48.1 KB)
TKC
Re: Jedicut with the 4xTB6560AHQ board 6B6560-4v3 - *.dll question
November 06, 2012 08:41PM
Hello
Today I have tried out the CncNet_XP.dll provided in last post, it seems that I can set now the enable output pin but the enable signal is reversed.
When I set the enable pin to 1 and manualy force it to low, using mentioned paramon program, the motors started to work, when the moving sequence has been finished the pin was not set to high.- It seems that inversion of enable signal is needed (active low).
Tomasz
Re: Jedicut with the 4xTB6560AHQ board 6B6560-4v3 - *.dll question
November 08, 2012 10:52AM
Hello,
I try to post a new plugin on saturday.

Jerome
Re: Jedicut with the 4xTB6560AHQ board 6B6560-4v3 - *.dll question
November 10, 2012 08:28AM
Hi,

I invert signal in the plugin in attached. Can you test it ?

Jerome
Attachments:
open | download - CncNet_XP_TB6560.zip (48.1 KB)
Re: Jedicut with the 4xTB6560AHQ board 6B6560-4v3 - *.dll question
May 12, 2013 11:03PM
Hi Gerome,

I am setting this controller to a friend.

With your modified dll has solved the problem of reversing the bit 1 but I can not change the speeds. Always go very fast if you change the settings.

Would be solved this with an external pulse generator?

Thanks in advance

David
Re: Jedicut with the 4xTB6560AHQ board 6B6560-4v3 - *.dll question
May 15, 2013 10:02AM
Hello

Sorry for the late answer.

What speed values do you set up ?
Do you uncheck "synchronize with an external timer..." ?

Without external driver you have to use very high value for speed settings.

Jerome
Re: Jedicut with the 4xTB6560AHQ board 6B6560-4v3 - *.dll question
May 15, 2013 09:00PM
Hello friend,

I've tried horn 500.

I'll try higher values​​.

I'm thinking about making a board with pulse adaptation as with other TB6560 "blue".

Greetings and thanks for your time.

David
Re: Jedicut with the 4xTB6560AHQ board 6B6560-4v3 - *.dll question
June 08, 2013 09:25AM
Hello movich,

I missed your question, sorry.

Is your board running ?

Jerome
hi,
Firstly, i am sorry for my english. it's terrible.
I will ask one question, is " 4 Axis CNC Printer Port Interface " compatible for Jedicut?
I can't use Jedicut with "4 Axis CNC Printer Port Interface". I have error. Error message is "time out : -1 ".
is dll error? none did not work. my software is XP pro.
Please help
Re: Jedicut with the 4xTB6560AHQ board 6B6560-4v3 - *.dll question
February 09, 2014 03:43PM
Hello,

i think you must set the parameter in jedicut(communication) without external timer.
Re: Jedicut with the 4xTB6560AHQ board 6B6560-4v3 - *.dll question
February 14, 2014 06:52PM
Exact thumbs up

Thanks Manfred smileys with beer

Jerome
Sorry, only registered users may post in this forum.

Click here to login



Aeropassion

Paris en photo | Design by Le Flaketou, création de site internet

Phorum